With the progress of society and the improvement of people’s living standards, people pay more and more attention to the maintenance of their skin and their own image. The choice of cosmetics is no longer limited to daily care products such as lotions, lotions, and creams, and the demand for color cosmetics products is growing. Color cosmetics can quickly and effectively improve and beautify personal skin condition and appearance. However, titanium dioxide, mica, film-forming agents, toners and other raw materials in color cosmetics products are not absorbed by the skin. Increases the burden on the skin, causing problems such as rough skin, large pores, acne, pigmentation, dull complexion, etc., affecting the health and appearance of the skin.
There are many different types of makeup remover products on the market, such as makeup remover water, makeup remover milk, makeup remover oil, makeup remover wipes, etc., and the performance of different types of makeup remover products is different, and the cleaning effects of makeup products are also different.
Based on the author’s years of research and development experience, this article shares the formula, formula principle and production process of a makeup remover.
Oil 50-60%, commonly used oils are isoparaffin solvent oil, hydrogenated polyisobutylene, triglyceride, isopropyl myristate, ethyl oleate, ethylhexyl palmitate, etc. The oil in the formula can dissolve the oil-soluble organic raw materials in the residual makeup products, and has a good moisturizing and nutritious effect to avoid dry skin after makeup removal.
Surfactant 5-15%, commonly used surfactants are anionic and nonionic surfactants, such as polyglycerol oleate, polyglycerol stearate, polyglycerol laurate, PEG-20 glycerin Triisostearate, PEG-7 Glyceryl Cocoate, Sodium Glutamate Stearate, Sodium Cocoyl Taurine, Tween, Span, etc. Surfactants can emulsify the oil-soluble organic raw materials and inorganic powder raw materials in residual color cosmetic products well. It also acts as an emulsifier for oils and fats in makeup removers.
Polyol 10-20%, commonly used polyols are sorbitol, polypropylene glycol, polyethylene glycol, ethylene glycol, glycerin, etc. Formulated as a humectant.
Thickener 0.5-1%, commonly used thickeners are carbomer , acrylic acid (ester)/C1030 alkanol acrylate cross-linked polymer, ammonium acryloyl dimethyl taurate/VP copolymer, acrylic acid hydroxyl Ethyl ester/sodium acryloyldimethyltaurate copolymer, sodium acrylic acid (ester) copolymer and sodium polyacrylate.
Production Process:
Step 1: heating and stirring water, water-soluble surfactant and polyol humectant to obtain a water phase;
Step 2: Mix the oily emulsifier with the oil to form an oily phase;
Step 3: Add the oil phase to the water phase to homogeneously emulsify and adjust the pH value.
Post time: Sep-23-2022